Cenchrus americanus
© Copyright 2020. All rights reserved.
Cenchrus americanus
Cenchrus americanus (L.) Morrone
Basionym: Panicum glaucum L.; Alopecurus typhoides Burm. f.; Chaetochloa glauca (L.) Scribn.; Chamaeraphis glauca (L.) Kuntze; Holcus spicatus L.; Panicum spicatum (L.) Roxb.; Pennisetum americanum (L.) Leeke; Pennisetum glaucum (L.) R. Br.; Pennisetum leonis Stapf & C.E. Hubb.; Pennisetum spicatum (L.) Körn.; Pennisetum typhoides (Burm. f.) Stapf & C.E. Hubb.; Pennisetum typhoideum Rich.; Setaria glauca (L.) P. Beauv.
Family: Poaceae (alt. Gramineae) subfamily: Panicoideae tribe: Paniceae subtribe: Cenchrinae.
Erect, robust, annual grass with tillers (0.5–)1.5–3 (–4) m tall; tillering from the base, and sometimes branching from the lower nodes; extensive root system, thick prop roots from lower nodes. Stems 1–3 cm diameter, nodes glabrous to bearded. Leaf-blades 20–100 cm long, 8–80 mm wide, ciliate, glabrous or hairy, linear to linear-lanceolate, flat, apex attenuate, base rounded or sub-cordate; ligule a fringe of hairs 2–3 mm long. Sheath glabrous or with sparse to dense tubercular-based hairs, usually densely bearded near the collar. Panicle spiciform, linear, elliptic, or ovate; dense, 10–50 cm long, 1.5–5.0 cm diameter; peduncle densely pubescent. Spikelets in clusters of 1–9 subtended by a persistent involucre of many bristles, mostly 4–7 mm long; stipe pubescent, 1–5 mm long; spikelets obovate 3–6 mm long, pedicellate. Caryopsis globose to cylindrical or conical, 2.5–6.5 mm long, exposed between gaping lemma and palea at maturity; white, pearl-coloured or yellow to blue-grey or brown, occasionally purple. 95,000–140,000 (–180,000) seeds/kg.
Africa, Northern: duchn, duhn, duhun, dukhon, dukn (Arabic, Sudan); دْرُعْ dro'o (Tunisian Arabic), gssab (Tunisia); biltug (Tigrinya & Blin, Eritrea)
Africa, Southern: babala, manna (Afrikaans); leotsa (Pedi); nyalothi (Sotho); inyouti (Ndebele); mhuga, mhungu (Shangaan); droo, gssab (Tunisia); amabele, unyaluthi, unyawoti, unyawothi (Zulu);mahangu (Oshiwambo); mexoeira (Mozambique); mhunga, munga (Shona, Zimbabwe), inyawuthi (Northern Ndebele, Zimbabwe), lebelebele (Setswana, Botswana), zembwe (Ikalanga, Botswana)
Africa, Eastern: mwere (Kikuyu, Kenya); mahangu (Namibia); mawele, uwele (Swahili); mpyoli (Bemba, Zambia); amabele, unyaluthi, unyawoti, unyawothi (Zulu); mpyoli (Zambia)
Africa, Western: gero (Hausa, Nigeria), emeye, oka (Yoruba, Nigeria);amala, ignati (Togo); gero (Hausa); emeye (Yoruba); maiwa (Nigeria); boudouma, ba angoure, haini, kirei, soumno, zongo (Niger); souna, tiotioni, sanio (Mali); moutiri (Guinea); nara, zia (Ghana); mouri, yadiri (Cameroun); iniadi, haini, gouri, kazouya, ouine, dou fouâ (Burkina Faso); ignati, nara, amala (Benin); souna, sania, tiotandé (Senegal); dokane, dokona. ligui (Chad); arum (Borno Kanuri); saɲo (Bambara); gawri (Fula); heyni (Zarma); masago (Somali)
Asia: 御谷 yu gu; 珍珠粟 zhen zhu su; la zhu bai; jin se gou wei cao (as Setaria glauca) (China); kinenokoro, kin enokoro, toujin kibi, tôjin bie, tôjin hie, parumitetto (Japan); baajaraa (Nepal); proso afrikanskoe, proso amerikanskoe (Russia); khao fang nok (Thailand); دُخن dokhn (Yemeni Arabic)
Asia, South: கம்பு kambu (Tamil); kambam (Malayalam); બાજરી bajri, બાજરો bajro (Gujarati); बाजरी bajri (Rajasthani, Marathi), ಸಜ್ಜೆ sajje, ಕಂಬು kambu, cumbu (Kannada); बाजरा bajra (Hindi, Urdu and Punjabi); సజ్జలు sajjalu (Telugu); বাজরা bajra in (Bengali); باجرا ba'ajra (Urdu, Kashmiri, Balochi, Pashto, Punjabi, Saraiki); ٻاجھري Sindhi
English: bulrush millet, candle millet, cattail millet, dark millet, horse millet, Indian millet, pearl millet, spiked millet
Europe: zeegroene naaldaar (Belgian); negerhirse, perlehirse (Danish); negergierst, parelgierst (Dutch); mil, mil à chandelles, mil africain, millet perle, millet d'Afrique, mil d'Égypte, pencillaire, petit mil (French); vesihaljas kukeleib (Estonian); Perlhirse, Negerhirse (German); miglio africano, miglio perla, miglio perlato (Italian); pärlhirs (Swedish)
Portuguese: capim-tinga, milhete, milheto, milho africano, milho miúdo, painço, milha-paiceira, peniseto milha-amarelada
Spanish: almorejo glauco, cusanillo, lagartera, mijo candela, mijo negro, mijo perla, panizo negro
Native:
The precise origin of Cenchrus americanus is unclear since it was domesticated some 4,000 years ago. It is thought to have originated in Sahelian Africa, in a diffuse belt stretching from western Sudan to Senegal.
Cultivated:C. americanus is an alternative to Sorghum spp. and other warm season forage crops. It can be used for grazing, green chop and silage, and for hay, with appropriate management.
Pearl millet has been found to be effective in suppressing root-lesion nematodes (Pratylenchus penetrans) and has been used as an alternative to soil fumigation in tobacco and potato cropping in Canada.
C. americanus is mostly grown as a grain crop, being the staple food in those parts of tropical Africa and India that are too hot, dry and sandy for sorghum production. Whole grains are fed to poultry and livestock, and the straw is used for bedding, thatching, fencing and fuel. Pearl millet also has application in a number of African folk medicines.
C. americanus is adapted to a range of soil types, but is best on sandy or light loam soils. It will grow on clays, but they must be well-drained, because it is very susceptible to waterlogging. Although it tolerates poor, infertile soils better than most other crop species, it is more productive on fertile soils. The ideal pH range is 5.5–7.0, but it will grow in soils with pH as high as 8.3. It can tolerate more acid soil than forage sorghums, growing in soils down to pH 4.5, with subsoils to as low as pH 4 and high in exchangeable aluminium. It is also slightly more salt tolerant than sorghum.
C. americanus is perhaps the most drought tolerant of the grain species, and is used in areas where maize (Zea mays) and Sorghum spp. are more likely to fail. However, it is less tolerant of waterlogging and flooding than sorghum. While it evolved in a region with average annual rainfall about 250 mm, it is now cultivated in areas with as low as 125 mm and up to about 1,500 mm/yr, but most commonly between 250 and 750 mm. For forage production, it requires a minimum annual rainfall of 500 mm.
It is grown between sea level and 1,800 m in the tropics, and to about 40° N in the USA. The optimum temperature for germination is 33‒35°C, and the minimum, 12°C. Sowing is best done when soil temperatures reach 18 °C or above, and night temperatures are above 10 °C. The optimum temperature for tiller production and development is 21‒24 °C, and for spikelet initiation and development about 25 °C. Pollen viability, panicle size and spikelet density are reduced by extreme, high temperatures before anthesis, thus reducing seed yield.
Not shade tolerant.
C. americanus is considered to be an obligate short day plant although the degree of photoperiod control varies among genotypes. There may also be an interaction between photoperiod and temperature. Cultivars vary in time to maturity from 55 to 280 days, but mostly from 75 to 180 days. Later-maturing varieties are favoured for forage production.
Quality is maintained by relatively frequent but lenient defoliation. Crops can be cut initially when they reach 75 cm to 1 m tall, since if plants are allowed to grow taller, quality declines, and there is difficulty in drying the hay. High regrowth yields after defoliation can best be obtained if the cutting height is above the apical meristem, which means adopting a stubble height of 15–20 cm. Grazing can start earlier when the stand reaches 30‒50 cm, but still with the same after-grazing residue to facilitate regrowth. Earlier defoliation encourages tillering. A rotational system favours efficiency of forage utilisation and facilitates better regrowth compared with continuous grazing, particularly when C. americanus appears susceptible to trampling. The crop should not be allowed to grow above 1 m high before subsequent grazing. The first cut is usually at 60‒65 days after planting, and successive cuts 30‒35 days after the preceding cut. Regrowth in successive harvests declines rapidly, the final cut coinciding with early head production. Harvesting for silage is recommended any time from boot to soft dough stage.
Not applicable.
Sowing recommendations vary considerably in relation to sowing method, application and soil type. Seed can be placed to 3 cm deep in light soil, but no more than 1 cm in heavier soils. For a grazing crop, seed can be drilled in to 35 cm rows at 5–15 kg/ha, or broadcast at 25–30 kg/ha. Heavier sowings result in fewer tillers per plant, but finer stems, which is more suitable for hay-making. Lighter sowings result in greater tiller numbers, of 12–15/plant, which is better for grazing. Seedlings emerge about 5 days after sowing, initially yellow in colour, and remaining so for 8–10 days. Colour improves and rapid growth occurs after about 14 days. Earlier sowing increases the likelihood of multiple cuts or grazings.
C. americanus is adapted to, and produces reasonably well on low fertility soils, but responds to improved fertility. Soil phosphorus and potassium levels should be monitored using soil analysis, but in the absence of a soil test on a suspected infertile soil, applications of 20–30 kg/ha P and 40–50 kg/ha K prior to sowing should improve performance. In intensively managed systems where large amounts of forage are removed from the field, maintenance applications of 20–30kg/ha P and up to 100 kg/ha K will also be necessary. Nitrogen fertility is also an important consideration, but must be approached with caution due to plant nitrate implications (see “Toxicity”). There is usually no need to apply nitrogen Fertilizer at sowing if using a well-prepared seedbed where significant amounts of nitrogen have been released during cultivation. However, application of 50 kg/ha N after each grazing or harvest helps to maintain productivity.
Compatible with forage legumes, particularly those with erect, ascendant or twining growth habit.
Grasses: Normally not sown with other grasses.
Legumes: Alysicarpus rugosus, Centrosema pascuorum, Crotalaria juncea, Lablab purpureus, Vigna unguiculata. Inter-row with Leucaena leucocephala.
C. americanus is host to numerous diseases caused by bacteria, fungi, viruses, and nematodes, parasitised by other plants, and subject to attack by numerous insects and birds, the impact of any one varying from country to country, and region to region. Some of the more important diseases are downy mildew caused by Sclerospora graminicola, smut (Moeszimyces (Tolyposporium) penicillariae), ergot (Claviceps fusiformis), rust (Puccinia substriata) and pyricularia leaf spot (Pyricularia grisea).
Stem borer (Coniesta ignefusalis Lepidoptera: Pyralidae), millet head miner (Heliocheilus albipunctella Lepidoptera: Noctuidae) and millet gall midge (Geromyia penniseti Diptera: Cecidomyiidae) are the major insect pests.
C. americanus is susceptible to parasitisation by angiosperm species, Striga hermonthica and S. asiatica.
There is little opportunity for spread in the presence of grazing livestock and insects.
Extremely low.
C. americanus has a higher leaf to stem ratio than other forages including the forage Sorghum spp. If managed correctly, with appropriate harvest intervals, C. americanus can provide high quality feed, with crude protein levels of (8‒) 10–14 (‒17)%, acid detergent fibre (ADF) of 35‒40% and neutral detergent fibre (NDF) 55‒70%. As with other tropical grasses, dry matter productivity, NDF, and ADF concentrations increase with time, while leaf:stem ratio and CP decrease linearly. Consequently, the standover value is usually poor because of low nutrient levels and low digestibility.
Young, leafy growth of C. americanus is very palatable to livestock, although palatability declines with age. Forage intake can vary from about 3 kg DM/100 kg body weight on immature forage to a low of 1.4 kg on mature forage. Some varieties have been reported as becoming unpalatable as a result of drought set-back. This tends to occur if soil nitrate-N levels are higher than available soil phosphorus levels. Conversely, unpalatability is less likely if P levels are higher than N levels. Palatability tends to recover in affected crops within 10 days of a significant fall of rain, provided it falls in the growing season and plants are able to resume growing.
C. americanus can develop high levels of nitrates under conditions favouring high levels of available soil nitrogen, particularly during periods of depressed growth such as caused by moisture stress or cold.
These conditions include:
Conservation of high nitrate material as hay does not reduce nitrate levels in the feed, but as silage, levels can be reduced by 40‒60%. Levels of nitrate in the dry matter above about 0.9% can cause toxicity.
Dry matter yield potential is strongly influenced by environmental conditions (soil fertility, soil moisture, temperature) and variety. Under rain-fed conditions in semi-arid environments, DM yields range from 0.25 to 3 t /ha, while under ideal conditions they can be as high as 27 t/ha, but more often they are about 20 t/ha in the tropics, and 8–10 t/ha in the subtropics.
Beef cattle on standover C. americanus in northern Australia gained 296 kg/ha over a 16-week period. Heifers (320 kg) in the USA gained about 0.7 kg/head/day and about 540 kg/ha over a 12- week period.
2n = 14, (15, 21, 28); outcrossing. Cultivars have been produced through selection from wild collections, and through genetic manipulation. C. americanus is compatible with related species such as C. violaceus and C. purpureus, providing ample opportunity for genetic improvement for both grain and forage traits. Large and diverse collections of germplasm are held by ICRISAT and ORSTOM and other national centres. C. violaceus has been used as a source of germplasm for improved resistance to disease and the hemiparasitic weed, Striga hermonthica. Interspecific hybrids between C. americanus (2n = 2x = 14, AA genome) and C. purpureus (2n = 4x = 28, A'A'BB genome) have produced low fertility or sterile triploids that have improved forage characteristics over both parents. Crosses with the more distantly related C. squamulatus (2n = 54), an apomict, are being used to insert apomixis to ensure genetic stability in highly heterozygous progenies of interspecific crosses. Breeding incorporating the brown-midrib (BMR), low-lignin trait has been used to improve forage quality.
Seed yields of about 250 kg/ha are obtained in the lowest rainfall areas, and (500–) 670–790 (‒1,500) kg/ha in the main production areas in Africa and India. Under optimal conditions, yields may be as high as 5 t/ha, but are often reduced by disease and bird attack.
Pre-emergence herbicides, atrazine, propazine, prometryne and simazine are used for weed control in crops. Atrazine usually gives better control of weeds than propazine, but propazine is generally safer. Atrazine or propazine or prometryne at 1.0 kg a.i./ha is recommended to control emerging weeds after the sowing of pearl millet. There should be optimum soil moisture at the time of application of atrazine. Metalochlor (1 kg a.i./ha) is used to control weeds in crops intersown with pulses like Vigna unguiculata. 2,4-D at 0.5‒1.0 kg/ha can be used for broadleaf control when C. americanus plants are 10‒30 cm tall (or about 21 days after sowing). Spraying later can reduce seed set, and earlier can be injurious to the crop root system.
Burton, G.W. 1980. Registration of pearl millet inbred Tift 383 and Tifleaf 1 pearl millet (Reg. PL8 and Reg. No. 60). Crop Science 20:292. doi.org/10.2135/cropsci1980.0011183X002000020061x
Cherney, D.J., Patterson, J.A. and Johnson, K.D. (1990) Digestibility and feeding value of pearl millet as influenced by the brown-midrib, low-lignin trait. Journal of Animal Science 68:4345–4351. doi.org/10.2527/1990.68124345x
Ferraris, R. (1973) Pearl millet (Pennisetum typhoides). Commonwealth Agricultural Bureaux, Hurley, Maidenhead, Berkshire, UK.
Hanna, W.W. (2000) Total and seasonal distribution of dry matter yields for pearl millet x wild grassy subspecies hybrids. Crop Science 40:1555–1558. doi.org/10.2135/cropsci2000.4061555x
Hanna, W.W., Hill G.M., Gates R.N., Wilson, J.P. and Burton, G.W. (1997) Registration of Tifleaf 3 pearl millet. Crop Science 37:1388. doi.org/10.2135/cropsci1997.0011183X003700040075x
Hill, G.M., Hanna, W.W, and Gates, R.N. (1999) Pearl millet cultivar and seeding method effects on forage quality and performance of grazing beef heifers. Journal of Production Agriculture 12:578–580. acsess.onlinelibrary.wiley.com/doi/10.2134/jpa1999.0578
Kollet, J.L., Diogo, J.M.S. and Leite, G.G. (2006) Rendimento forrageiro e composição bromatológica de variedades de milheto (Pennisetum glaucum (L.) R. BR.). Revista Brasileira de Zootecnia 35:1308–1315. doi.org/10.1590/S1516-35982006000500008
Norman, M.J.T. and Begg, J.E. (1968) Bulrush millet (Pennisetum typhoides (Burm.) S & H) at Katherine, N.T.: A review. Journal of the Australian Institute of Agricultural Science 34(2):59–67. eprints.icrisat.ac.in/id/eprint/4381
Oyen, L.P.A. and Andrews, D.J. (1996) Pennisetum glaucum (L.) R. Br. In: Grubben, G.J.H. & Partohardjono, S. (eds) Plant Resources of South-East Asia No 10. Cereals. Backhuys Publishers, Leiden, the Netherlands. p. 119–123. edepot.wur.nl/318062
Radhouane L. (2008) Salinity effect on germination, growth, and grain production of some autochthonous pear millet ecotypes (Pennisetum glaucum (L.) R. Br.). Comptes Rendus Biologies 331:278–286. doi.org/10.1016/j.crvi.2008.01.006
'Ingrid Pearl' Released in Australia (1968). Derived from CPI 28818 ex Centre des Recherches Agronomiques, Bambey, Senegal, West Africa. Robust, freely tillering type to 3.8 m high; flowers 1‒2 weeks earlier than Katherine Pearl, with less hairy, wider, and lighter green leaves and longer inflorescence.
'Katherine Pearl' Released in Australia (1971). Derived from CPI 11378 introduced from the Department of Agriculture, Accra, Ghana. Robust, variable, freely tillering annual up to 3 m high; leaves flat, dark green, and up to 8 cm wide, generally hairy but not always so; 3–4 months from sowing to flowering.
'Siromill' Released in Australia (1996). Derived from CPI 114994a, which was selected from ICRISAT 8846, a landrace from Chavuta, Central Province, Zambia. A late flowering, leafy cultivar to about 3.5 m tall.
'Tamworth' Released in Australia (1967). Bred line, selected after three generations of inbreeding of the progeny of a selected F3 plant of Gahi-I (Georgia hybrid No. 1). Mid season to late in maturity; tillers well, grows 2‒3 m tall; stems are of moderate diameter and normally not prone to lodging; leaves medium to broad, glabrous.
'Tifleaf-1' Released in USA (1980). F1 hybrid between Tift 23DA and Tift 383. Low- growing; leafier and easier to manage than taller varieties. Although it yields less dry matter, it produces better ADG and more LWG per ha; suitable for grazing.
'Tifleaf-2' Released in USA. Developed from a cross between `Tift 85D2A1' and `Tift 383'. Similar to 'Tifleaf 1', but higher yielding and immune to rust (Puccinia substriata) and leafspot, through incorporation of dominant genes for immunity to these diseases transferred from C. violaceus with repeated backcrosses.
'Tifleaf-3' Released in USA (1995). A 3-way dwarf leafy forage hybrid between the dwarf CMS single-cross F1 hybrid Tift 8593 and the dwarf pollinator Tift 383. IVDMD and heifer grazing gains similar to those of ‘Tifleaf 2’.
Hybrid cultivars released around the world include Elite II, HyPearl, Justleaf, Milkstar, Nutrifeed, Pearler, Pennleaf, PP102M, Sabala and Speedfeed, but little information on origin and relative characteristics has been published.
None reported.